Amplicord 55X Mode D'emploi page 55

Instructions for Use [E]
1. Switch on the device by sliding the power switch towards the
symbol I.
2. Apply the device onto the softer part of the neck, with a light and
even pressure. The device will automatically begin functioning
upon contact with the skin.
3. Test the device by vocalising the letters A - E - I - O - U.
4. If you have inserted the dial stopper, slide it down to access the
dials.
5. Use the T dial to adjust to the desired tone.
6. Use the V dial to adjust to the desired volume.
7. If you have inserted the dial stopper, slide it back up to lock the
dials at the desired settings.
Maintenance and user rules
Maintenance will be carried out by the dealer.
We recommend cleaning the device on a weekly basis using a
cloth with a little amount of denatured alcohol. Do not use any other
type of solvents.
Keep away from heat sources and do not immerse in water or other
liquids.
In case of problems due to malfunctions, defects, unexpected
events or situations and for the maintenance procedures of the
device, please contact the manufacturer or the local distributor.
The device is for single person use.