Taring; Plus/Minus Weighings; Net-Total Weighings - KERN&SOHN CM Série Mode D'emploi

7.4.2 Taring

Switch the balance on by pressing the
Place the tare cup on the weighing plate and press the
"0". Now the weight of the cup is memorised internally.
Fill the object into the cup, read the measuring value.
By pressing the
again.
The taring procedure can be repeated continuously, for instance when mixing several
components.
The limit is reached when the full weighing range is overlay.
After having removed the tare cup , the total weight will appear as a negative value.

7.4.3 Plus/Minus Weighings

For instance to control piece-weights.
Switch the balance on by pressing the
Place rated weight on the weighing plate and tare on "0" by
weight.
Place the objects on the weighing pan successively, the balance will show any devia-
tion from the rated weight in "+" and "-".
According to the same procedure packages with the same weight, related to a rated
weight, can be produced. Return to the weighing mode by pressing the

7.4.4 Net-total weighings

Useful when a mixture of several components will be weighed in a tare cup, and fi-
nally the sum weight of all components weighed in will be needed for direction (net-
total, i.e. without the weight of the tare cup).
Example:
Tare cup on weighing plate, tare on "0" by pressing the
Weigh component
memory is shown by a triangle on the far left of the display.
Weigh component
the sum of component
Weigh component
the sum of the components
If necessary fill the formula container up to the desirable level. To return to the weigh-
ing mode press the
10
key after a weighing procedure, "0" will appear on the display
and tare back to "0" with the
, by pressing the
and . Tare to "0" by pressing the
, by pressing the
and and
key
key, then wait for the "0" indication.
key. Indication will go to
key, then wait until "0" is indicated.
key. The activation of the
key the net total is displayed, this means
key the net-total is displayed, this means
.
key. Remove rated
key.
key.
key.
CM-BA-e-0618