Accessories; Names Of Parts And Functions - Selegiochi STAR THEATRE Mode D'emploi

IMPORTANT INDICATIONS ON USE AND SUGGESTIONS
To fully appreciate the projected images, make sure the room is completely dark.
It may take a few minutes for your eyes to become used to the darkness. Look at the centre of the projected image
and wait for your eyes to refocus: the fi rst images projected may appear a little blurred, but as your eyes become
accustomed to the darkness you will see the stars clearly.
The projected images can be seen most eff ectively on a white or light coloured ceiling or walls.
The ideal projection distance is between 2 and 2.30 metres. Images projected at much greater distances will be
out of focus.
To protect eyes from the light, if the projector is turned on when there is no disc inserted it will turn itself off
automatically. In this case, insert the disc and turn the projector on again.
Depending on how the disc is inserted, the visible part of the Milky Way will vary. To observe the centre of the
Milky Way without removing the disc, activate the Rotation function to start the sky movement. This function
can be deactivated at any time.
The shooting stars shower will always appear at the same point, at varying intervals of time.
To clean the projector or the disc, wipe gently with a soft cloth. Do not use solvents, petrol or any other chemical
substances.
If you fi nd any parts missing or damaged on opening the box, do not use the product and contact the point
of sale immediately.
The appearance of some of the parts shown in this instruction manual may vary slightly from those found in
the box.
1. Projector
2. Interchangeable discs
3. Adaptor
4. Lens cap
5. Brief illustrated text about the constellations
6. Instruction manual

NAMES OF PARTS AND FUNCTIONS

1. Focusing plastic ring.
Adjusts the focus.
2. Disc box.
Contains the disc.
3. Projector angle adjustment button.
Changes the angle of the projector.
4. ON/OFF switch.
5. Projector pilot light ON/OFF.
Indicates whether the projector is turned on or off .

ACCESSORIES

6. Shooting Stars switch.
Activates / deactivates the Shooting Stars function.
7. Rotation switch.
Activates / deactivates the Rotation function.
8. Timer switch.
Activates / deactivates the Timer. When the timer is
deactivated the projector will turn itself off automa-
tically after three hours.
9. Electric plug holes.
For plugging the adaptor into.
ENGLISH
1
2
1
1
1
1
21