General Safety Norms - Sandri Garden SES 2000/40 Manuel D'utilisation

Maximum guide bar length
utilizable. max 400 mm
Cleaning
Shows the picture linked with the
manual's text
Discarded electrical appliances
contain recyclable materials and
should therefore not be disposed of
along with household waste.

4. GENERAL SAFETY NORMS

All users of the chain saw must first carefully
read the maintenance and operating manual
and familiarise themselves fully with all
controls for correct operation of the device.
Do not let children come into contact
with the tool. Keep all the people away
from the work area
# Using electric tools, basic safety precautions
should always be followed to reduce the risk
of fire,electric shock and personal injury.
# Guard against electic shock. Avoid body
contact with earthed or grounded surfaces.
# Store idle tool. When not in use the tools
should be stored in a dry, hight or locked up
place, out of reach of children.
# Do not force the tools. It will do the job better
safer at the rate for which it was intended.
# Cluttered areas and benches can cause
accident.
# Read the following safety instruction and
tool's labels before attempting to operate this
product. Be aware of tool's operation range and
limitations as well as its dangers.
#When not in use, power tools must be stored in
a dry place and locked up securely, out of reach
of children.
18
# Never allow the chain saw near your body or
your clothing when starting or using it.
# Do not switch your machine on when it is upside
down.
# When starting the chain saw ensure the
chain is not touching anything.
# Remember that the machine continues to
run for a short period after it is switched off.
# Beware of objects hurled by the line head.
# Do not use and do not start up and do not
use the chain saw near people, other animals
or obtrusive objects.
# During operation we recommend
keeping a minimum distance of 10 m
between the machine and other
people.
# Always hold the device with both hands.
# Stand in a safe and steady position on both
legs.
# Never carry the chainsaw by the cable or
when it is connected to the mains or with your
fingers on the trigger.
# Avoid accidental starting. Ensure the
switch is in the off position before
plugging in.
Carrying power tools with your finger on the
switch or plugging in power tools that have
the switch on invites accidents.
# Keep the cable away from heat sources,
oils or sharp edges.
# When sawing, do not use chainsaw above
shoulder height.
# The operator is responsible for any
accidents or hazards that may occur to other
persons or their belongings.
# Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
Wear clothing and safety gear suitable
for chain saw cutters operations.