Safety Guidelines - SilverCrest SBT 3.6 D2 Mode D'emploi

Safety guidelines

RISK OF ELECTRIC SHOCK!
Connect the mains adapter for charging the built-in bat-
►
tery only to a correctly installed mains power socket that
supplies a mains voltage of 100 - 240 V ~ , 50/60 Hz.
The cable of the mains adapter cannot be replaced.
►
If the cable is damaged, the whole appliance must be
scrapped.
In the event of a malfunction and before cleaning dis-
►
connect the plug from the mains power socket.
Always pull on the mains adapter itself; never pull on the
►
power cable.
Do not kink or crush the power cable of the mains adapter,
►
and route the cable so that it cannot be stepped on or
tripped over.
Ensure that neither the mains adapter nor its cable become
►
wet or damp during operation. Route the cable in such
a way that it cannot be crushed or damaged.
If the appliance is damaged, discontinue using it imme-
►
diately to avoid personal risks.
Do not use the mains adapter outside.
Do not wrap the mains adapter cable around the appliance,
►
and protect it from being damaged.
Never touch the appliance, mains adapter or its cable
►
with wet hands.
WARNING! Keep the appliance dry.
►
SBT 3.6 D2
GB │ IE │
23 ■