Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10 electrolux
TECHNICAL SPECIFICATIONS
DIMENSIONS
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
WATER PRESSURE
Connection to water supply
INSTALLATION
Remove all protective packaging for transit
before using for the first time. Keep in case
needed for future transit: Transporting a
non-secured appliance may damage inter-
nal components and cause leakages and
malfunctions. The appliance can also be
damaged through physical contact.
Unpacking
1
3
Untying
4
1a
Height
Width
Depth
Minimum
Maximum
2
4
1a
1b
2
1b
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Type 20/27
2a
3
To install your washing machine at the
same level as surrounding furniture, pro-
ceed as shown on picture 4.
Water supply
1
In case of necessity move the inlet hose in
the direction shown on picture no. 1. To
make this loose the inlet hose ring nut and
position the inlet hose downwards as
drawn on picture no. 1. Tighten the ring nut
back and make sure there are no leaks.
Open the water inlet tap. Check there are
no leaks. The water inlet hose can not be
extended. If it is too short, please contact
the after-sales service.
2b
4
2
Publicité
Chapitres
Table des Matières
