Agu Sunny SUN1 Mode D'emploi page 37

Option 1: mounting on the ceiling/wall with connecting directly to the
wiring.
Option 2: mounting on the wall with the connection to the outlet, using
the cable supplied.
THE FIRST OPTION FOR MOUNTING THE DEVICE:
1. Use dowels and screws, fix the mounting plate on the ceiling/wall.
2. Use the connectors to connect the lamp wires to the 220 V network
wiring.
3. Install the lamp in the grooves and turn as shown in the picture.
THE SECOND OPTION FOR MOUNTING THE DEVICE:
1. Insert the cable into the lamp (1).
2. Install the cable holder (2).
3. Connect the lamp wires using connectors (3). Do not forget to connect
all three grounding cables!
4. Secure the mounting plate with dowels and screws (4).
5. Install the lamp in the grooves and turn as shown on the picture (5
and 6).
6. Check the reliability of the fastening and connect the lamp to the
network.
Check if the lamp is securely attached!
EN
37