Philips Sonicare AirFloss HX8221/02 Mode D'emploi page 11

Handle and nozzle
1 Remove the nozzle from the handle. Rinse the nozzle after each use
(Fig. 14).
2 Open the reservoir and rinse it under the tap to eliminate residue
(Fig. 15).
Tip: You can also use a cotton bud to wipe the reservoir.
Note: Do not immerse the handle in water.
3 Wipe the entire surface of the handle with a damp cloth (Fig. 16).
Charger
1 Unplug the charger before you clean it (Fig. 17).
2 Wipe the surface of the charger with a damp cloth (Fig. 18).
Storage
If you are not going to use the AirFloss for an extended period of time,
follow the steps below.
1 Open the cover of the reservoir and empty the reservoir.
2 Press the activation button until no more spray comes out of
the nozzle.
3 Unplug the charger (Fig. 17).
4 Clean the AirFloss nozzle, handle and charger.
5 Store the AirFloss in a cool, dry place away from direct sunlight.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/
service or go to your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the worldwide guarantee
lealet for contact details).
ENGLISH
11