Publicité
Les langues disponibles
Les langues disponibles
GB
please take care that all packing
and protective materials have
been removed from the appliance.
• Before the first use, the cooking
surface and the grease pan should
be cleaned (see chapter "Care").
The new appliance may emanate
some smoke during the first use.
Start-up
• Put the appliance on a level
surface.
• Install the grease pan (see picture
A) onto the front of the appliance.
• Fully unroll the connection cable.
• Turn the regulator to the mini-
mum position and stick the power
adaptor into the rear side of the
appliance until it clicks into place
(see picture B).
• Then plug in the appliance and
turn the regulator to the maxi-
mum position.
• Let the grill preheat for 5 to 10
minutes.
• When the preheating stage has
ended, turn the thermostat to the
desired position and let the food-
stuffs cook according to your
taste.
• CAUTION: do not cut directly on
the cooking plate as this will
damage the non-stick coating.
• If you would like to use cooking
liquid during use, take the grease
pan carefully by the small grips on
both ends and let the liquid run
out of the spout into a receptacle.
CARE
Always unplug the appliance and
let it cool down completely before
cleaning it.
Cooking surface: clean the cooking
surface with paper towel and then
with a humid sponge and some
washing-up liquid, wipe with the
humid sponge and dry.
Grease pan: clean the grease pan
with a sponge and some washing-up
liquid, rinse under running water
and dry.
Wooden handles: wipe the wooden
handles with a damp cloth and dry
immediately.
CAUTION:
Never immerse the base of the
appliance and the power adaptor
in water. Do not use any metallic
sponge or any scouring or corrosive
agent (type oven cleaner) on the
cooking plate, as this may damage
the appliance permanently.
Publicité
