Timer; Automatic Hotplate Switch-Off; Automatic Timer; Kitchen Timer - NEFF T1 Série Mode D'emploi

Timer

The timer can be used in two different ways:
To switch a hotplate off automatically
■
As a kitchen timer
■

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
Set the heat setting.
1.
Touch the symbol. The
3
2.
lights up. ‹‹ lights up on the timer display. To select a
different hotplate, touch the
indicator for the desired hotplate lights up.
Touch the + or - symbol. The default value appears.
3.
+ symbol: 30 minutes
- symbol: 10 minutes

0LQ
Touch the + or - symbol until the desired cooking time
4.
appears on the timer display.
The cooking time counts down. If you have set a cooking time
for several hotplates, you can display each cooking time. To do
this, touch the symbol repeatedly until the
3
up brightly for the desired hotplate.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
lights up in the hotplate display. The
‹
hotplate lights up brightly. A signal sounds.
timer display for one minute. Touch the
and indicators go out and the audible signal ceases.

Wipe protection

If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the symbol. A signal sounds. The control
"

Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.
The display goes out when you touch any control. You can
make new settings.
display for the desired hotplate
x
symbol repeatedly until the
3

display lights
x
indicator for the
x
lights up in the
‹‹
3 symbol. The display
and flash alternately in the
" ‰
Changing or cancelling the duration
Touch the 3
lights up brightly. Use the + or - symbol to change the cooking
time or to set to
Note: You can set a cooking time of up to 99 minutes.

Automatic timer

You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
x
off the automatic timer for the hotplates.
Touch the
3
lights up brightly. Use the + or - symbol to change the cooking
time or to set to

Kitchen timer

You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
0LQ
Setting procedure
Touch the
3
1.
kitchen timer lights up.
Touch the + or - symbol. The default value appears.
2.
+ symbol: 10 minutes
Symbol -: 05 minutes.
Use the + or - symbol to set the time.
3.
The time starts counting down after a few seconds.
When the cooking time has elapsed
A signal sounds once the time has elapsed.
the timer display. The
brightly. After 10 seconds, the display switches off.
Changing the time
Touch the
3
kitchen timer lights up. Use the + or - symbol to set the time.
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
symbol repeatedly until the desired
‹‹ .
symbol repeatedly until the desired
‹‹ .
symbol repeatedly until the
lights up on the timer display.
‹‹
display for the kitchen timer lights up
V
symbol repeatedly until the
x indicator
indicator
x
indicator for the
V
lights up on
‹‹
indicator for the
V
25