Troubleshooting - Arjohuntleigh Sara 3000 Notice D'utilisation

Troubleshooting

Problem
The resident is not positioned correctly in the
sling.
The resident feels discomfort in the leg area when
seated in the sling.
the lift.
The position of the resident in the sling should be
more reclined or seated.
The resident wishes to have more support for the
back.
The resident feels discomfort in the waist area.
The sling is sliding up under the resident's arms.
For the MAA4050M sling: The head is not
supported by the sling.
The resident feels discomfort while using the
sling.
The Flites is soiled, stained or wet.
The "Do NOT wash" label is damaged or missing
and the underlying red label "Do NOT use/lift"
appears.
Action
Make sure the clip/loops are attached at the
right length.
Make sure the straps are not twisted.
Make sure the resident is positioned on the
inside of the sling. The outside has a label for
reference.
Make sure the resident is centred in the sling.
Make sure that there are no creases on the leg
right length.
Make sure the clip is not caught between the lug
on the lift and the clip attachment.
combinations described in section "Allowed
Combinations" on page 6.
resident's position.
the lift cords to adjust the resident's position.
Adjust the support belt, tighten or loosen.
Make sure the head section of the sling is buckled
together with the shoulder section of the sling.
Make sure the resident is holding on to the
handles on the lift.
Adjust the support belt for a more comfortable
Dispose the Flites and replace it with a new one.
Dispose the Flites and replace it with a new one.
11
GB