Adjusting Of The Depthskid; Cleaning The Tiller; Engine - Texas Hobby 300 Manuel De L'utilisateur

optimal tightening of the belt, which transfers the power from the engine to the
transmission.
The ground can be tilled in two directions, thus achieving optimum tilling.
Figur 9
Do not cultivate in very wet soil as clods of soil will be formed, and these are difficult to
break. Dry and hard soil may need to be cultivated twice.
Note: The transmission becomes very hot, during use.

Adjusting of the depthskid

The depth skid can be adjusting for tilling in three different depths. The deeper the depth
skid sits in the soil, the deeper the tilling blades will work and the slower the machine will
advance. The right cultivating depth will lighten your workload. The correct tilling depth
depends on the soil, and we recommend you make several attempts to see how deep the
depth skid should be so that you can work optimally in your soil.
The right setting depends on the soil.

Cleaning the tiller

The tiller should be cleaned after use. Use your garden hose and wash off soil and dirt.
Clean the rotor shaft of any grass, etc. The chassis number should only be cleaned with a
moist cloth otherwise it may be damaged. Avoid using a high pressure cleaner for
cleaning.

Engine

The engine is delivered without oil and fuel. Remember to fill the engine with engine oil
before starting.
Follow the guidelines in the user manual for correct use and maintenance of the engine.
The engine is delivered withoutoil. See attched enginemanual for correct use of the
engine.
11