Hewi 805 Série Notice De Montage page 6

Settings
Factory settings
To reset all settings
(30 cm / 0 sec / Sensor)
6 | HEWI
Status LED
Colour sequence
green – yellow – green =
green – red – green =
Push buttons
To change the settings, hold the buttons down until the
status LED switches into fast flashing mode.
The current setting is indicated by the colour of the LED.
Press button repeatedly to change the setting.
Length of the towel
green = 20 cm / 8"
yellow = 30 cm / 12"
red
= 40 cm / 16"
Time delay after towel output
green = 0 sec
yellow = 1,5 sec
red
= 3 sec
Operating mode
green = Automatic towel output (Tower out)
1.
yellow = Towel output on request (Sensor)
1.
Batteries empty,
please replace.
2.
2.