Technical Specifications - EuroLite LED DWL-2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Article:
Power supply:
Power consumption:
Number of LEDs:
Type of LEDs:
Maximum ambient temperature T
Max. housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 08.08.2008 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
4 W
2
1W
:
45° C
a
(steady state):
60° C
B
0.5 m
0.1 m
95 x 170 x 235 mm
1 kg
50630110 - 115
50630120 - 125
230 V AC, 50 Hz ~
8 W
4
1W
45° C
60° C
0.5 m
0.1 m
125 x 227 x 205 mm 125 x 227 x 205 mm
2 kg
11/19
50630130
230 V AC, 50 Hz ~
13 W
2
3W RGB
45° C
60° C
0.5 m
0.1 m
2 kg
00029828.DOC, Version 1.1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Led dwl-4Led dwl-6

Table des Matières