Disposal Of Packaging Materials; Description Of The Appliance; Technical Data - SilverCrest SHTT 2200 B1 Mode D'emploi

Disposal of packaging materials

The packaging protects the appliance from damage during transport. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTE
► If possible, keep the original packaging during the warranty period so that
the device can be properly packed for returning in the event of a warranty
claim.

Description of the appliance

Figure A:
1 Styling jet
2 Air intake grille
3 Sensor field
4 Hanger eye
5 Control lamp
6 Blower level switch (2 levels)
7 Heater level switch (3 levels)
8 Cold air button
Figure B:
9 Finger diffuser

Technical data

Mains voltage
Rated power
Protection class
SHTT 2200 B1
(Cool-Shot)
220 – 240 V ∼ (alternating current), 50/60 Hz
1900 – 2300 W
II / (double insulation)
GB │ IE │ 15 ■