Publicité
Les langues disponibles
Les langues disponibles
WARNING
Read this manual carefully before using the
machine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe
the enclosed safety instructions as well as
the additional safety instructions.
The following symbols are used throughout
this manual:
Denotes risk of personal
injury or damage to the tool.
ADDITIONAL SAFETY INSTRUCTIONS
FOR SANDERS
_
Observe the applicable regulations when sanding
painted surfaces.
_
Whenever possible, use a vacuum extractor for
dust collection.
_
Remove dust and other waste matter in an
environmentally safe way.
_
Take special care when sanding lead based paint:
- All persons entering the work area, must wear a
mask specially designed for protection against lead
paint dust and fumes.
- Children and pregnant women must not enter the
work area.
- Do not eat, drink or smoke in the work area .
ELECTRICAL SAFETY
Always check that the power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION
Your triangular sander has been designed
for sanding applications.
1 On/off switch
2 Dust extraction connection
3 Sanding pad
4 Sanding paper
Fitting sanding sheets
_
Take sanding paper (4) of the required
grain size and place it on the sanding pad
(3). Make sure that the perforations in the
paper correspond with those on the sanding pad.
_
Press the paper firmly on the sanding pad.
The sanding paper must be
fitted firmly on the sanding
pad and should not come
Dust extraction
The dust extraction connection (2) together
with an external vacuum cleaner takes care
of the dust extraction of the working surface.
_
Slide the suction mouth of a vacuum
cleaner onto the connection (2).
GB
TRIANGULAR SANDER
loose.
Switching on and off
_
To switch the machine on, set the on/off
switch (1) to 'I'.
_
To switch the machine off, set the on/off
switch (1) to '0'.
Never use the machine for
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
_
Regularly clean the ventilation slots.
TECHNICAL DATA
Mains voltage V
Mains frequency Hz
Power input W
Orbits min-1
Sanding surface mm
Weight kg
Level of sound pressure measured
according to EN 60745-2-4:
LpA (sound pressure) dB(A)
LWA (acoustic power) dB(A)
Take appropriate measures
for the protection of hearing.
Weighted root mean square acceleration
value according to EN 60745-2-4:
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
Made in China
sanding magnesium
workpieces.
230
50
180
10,000
90 x 90 x 90
1.4
78
92
< 2.6 m/s²
replacement after
dispose of it in an
2010
Publicité
