Intended Use; Scope Of Delivery - BASETech 1460697 Notice D'emploi

3. Intended Use

The digital soldering station serves to perform soldering work in the electrical and electronic area in connection with
various soft solders (lead/silver solder). The solder temperature is adjustable, the soldering tip is replaceable. A large
LC display shows both the set temperature and the temperature currently measured at the soldering top.
On the side of the soldering station there is a deposit for the solder gun that holds an extensible compartment with a
sponge (to clean the hot soldering tip; the sponge must be moistened with water).
The soldering station is only suitable for operation on mains voltage (230 V/AC, 50 Hz).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances. The hot soldering tip of the soldering gun may, however, be cleaned with a sponge moistened
with water.
For reasons of safety and approval, the product must not be converted and/or changed by you. Using the product
for any other purposes than those described above may damage the product. Improper use also may cause dangers
such as short circuit, fire, electric shock, etc. Read the operating instructions precisely and keep them. Only pass the
product on to any third parties together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Scope of Delivery

• Soldering station
• Operating Instructions
Current operating instructions
Download the current operating instructions via the link www.conrad.com/downloads or scan the
displayed QR code. Follow the instructions on the website.
20