Singer 90S Manuel D'instruction page 44

STRAIGHT STITCHING
1. SETTINGS
NOTE: Based upon the weight of the fabric, slight
C. Start/stop button
D. Presser foot lifter
F. Needle stop position control
NOTE: Since a straight stitch has no width, the
stitch width control is used to change the needle
position.
presser foot lifter.
enters the fabric.
machine.
NOTE: The needle plate has both metric and inch
markings as an aid for guiding your fabric when
sewing a seam.
NOTE: To secure the stitching and avoid raveling,
press either the reverse stitch button or the tacking
stitch button. See page 36 for detail.
lines on the needle plate. The numbers indicate distance from
the needle at its center position.
42
A
1
B
C
D
2
5
6
E
F
4
3
mm)
mm)
mm)
mm)
mm)