Publicité
Les langues disponibles
Les langues disponibles
Conditions of Safe use
The following conditions apply to the installation, operation an
Failure to observe these may compromise the safety y integrity of the
1. The user shall comply with the requirements given in the ma
Manual and Technical manual) in regard to all relevant fun
use, installation, operation, maintenance, proof tests, maximu
etc;
2.
Selection of this equipment for use in safety y functions and the
maintenance and repair shall only be carried out by y competen
conditions and recommendations in the user documentation.
3. All information associated with any field failures of th
dependability management process (e.g., IEC 60300-3-2) an
4.
The unit should be tested at regular intervals to identify y any
manual.
5. If the product is used in a redundant installation, both hard
integr y y for SIL 2 can be achieved. The installation must be s
it
common cause failures and independence from cascading fail
© Eaton MEDC Ltd 2018
nd maintenance of the assessed equipment.
t
e assessed equipment:
anufacturer's user documentation (This Safety
ctional safety y aspects such as application of
um ratings, environmental conditions, repair,
t
installation, configuration, overall validation,
b
nt personnel, observ v ing all the manufacturer's
his product should be collected under a
nd reported to o the manufacturer.
f
malfunctions; in accordance with this safety y
dware safe y y integr ty y and systematic safety y
such as to ensure sufficient protection against
ures.
t
r
t
t
it
t
t
01/18
Publicité
