Using The Mains Rectifier - Waeco CoolPower MPS 35 Notice De Montage Et D'utilisation

_MPS-35.book Seite 17 Donnerstag, 28. Mai 2009 5:13 17
CoolPower MPS35
7

Using the mains rectifier

Warning!
e
Do not reverse the polarity. If the poles are reversed device may
overheat and be damaged.
Caution!
e
Replace defective fuses with new ones of the same rating (15 A
slow-blow).
Caution!
e
Protect the positive connecting cable to the battery by an external
fuse of 10 A (fig. 2 4, page 3).
Insert the fuse as near as possible to the battery.
➤ Determine the required cross section of the cable in relation to the cable
length according to fig. 3, page 3.
Key for fig. 3, page 3
Co-ordinate axis
l
∅
➤ Connect the mains rectifier according to the circuit diagram in fig. 2,
page 3.
Key for fig. 2, page 3:
Item Explanation
1 Mains cable
2 Battery input terminals
3 Compressor output terminals
4 Fuse (not included in scope of delivery)
5 Battery
rt red
sw black
Meaning
Cable length
Cable cross section
Using the mains rectifier
Unit
m
mm²
17