Dörr Premium Steel Notice D'utilisation page 6

Operation
Inserting/replacing the batteries
Screw-off the torch head (1) counter clock-
wise. Insert appropriate batteries according
to the polarity and screw on the torch head
again.
Turn on/off the torch
To turn on/off the light press the rubber
button on the bottom of the torch. The On/
Off button is made of fluorescent rubber
and it glows at night (if previously charged
by light).
Light adjustments/dimmer
To dim the brightness and to switch on the
SOS flashing, turn the mode ring (2) to the
appropriate position (also note chapter
„Technical Specifications").
Technical Specifications
Dimmer Positions
Function
Brightness
Runtime
(with fresh batteries)
Illuminant
Beam distance
Impact resistance
Weather resistance
Batteries
Measurements
Weight
Supplied with
Item No
6
• • •
Light 100% Light 50%
200 Lumen 100 Lumen
1,5h
1 CREE® XPG (R5) LED, Risik Group 2
30m
up to 1,5m drop height
IPX8 (up to 2m water depth)
1pc Lithium battery CR-123A (included)
89 x Ø23mm, / Torch head Ø23mm
approx. 55g (w/o batteries)
Case, hand strap, black spare rubber button,
spare rubber sealing ring (O-ring), 1pc CR-123A battery
980542
• • •
Light 25%
60 Lumen
2,5h 4h
SOS
SOS
Flashing
–
4h