Intro Check - Teac PD-D2610MK II Manuel Du Propriétaire

To add a track/file to the program
If you want to add a track/file to the end of the program,
press the PROGRAM CHECK button repeatedly until "A"
appears after the end of the program.
Then select a track/file number using the numeric buttons and
press the PROGRAM button. The track/file is added to the
program.
< If you want to rewrite a track/file, press the PROGRAM
CHECK button repeatedly until the program number which
you want to rewrite appears on the display.
Then select a new track/file.
To delete a track/file from the program
In the stop mode, press the PROGRAM CHECK button
repeatedly until the program number to be deleted appears
on the display, then press the CLEAR button. The selected
track/file is deleted from the program.
To clear the program
When stopped, press the stop (H) button twice to clear the
program completely.
< If the power is turned off, the programed contents will be
erased.

Intro Check

Intro check mode turns on/off by pressing the INTRO
CHECK button
In intro check mode, INTRO indicator lights. During playback the
first 10seconds of the tracks/files are played.
When all tracks/files have been played once, the unit will stop
playback.
15