Publicité
Les langues disponibles
Les langues disponibles
5) Display indication during temperature recording
Display examples of
temperature
recording:
OK Display
ALARM Display
6) End of temperature recording / Stop Mode
(only for standard Version)
20160927_Release_8.2
A (OK symbol) is indicated during normal
operation as long as no alarms have been
recorded.
The monitored goods have not been exposed to
temperature and time conditions outside the
pre-set alarm parameters
This (OK symbol) will be replaced by a
(ALARM symbol) as soon as any alarm has
been triggered. Additional arrows are shown in
the left display area to indicate which limit has
been violated.
The monitored goods have been exposed to
temperature and time conditions outside the
pre-set alarm parameters. The ALARM
indication cannot be cancelled nor reset
The Q-tag
Quad may be stopped if the recording
®
shall be finished, e.g. if a shipment has reached its
final destination.
To do so, the STOP-button shall be pressed for at
least 2 seconds. The running indicator disappears.
A (OK symbol) or a (ALARM symbol) and
alarm flags remain stable for at least 3
page 4 of 26
month.
Publicité
