Wall-Mounting - Fysic FX-3930 Mode D'emploi

4.2 Wall-mounting:

1. in a vertical line, drill
2 holes at a distance
of 8.4 cm from each
other and insert plugs
and screws; let the
head of the screws
protrude for 5 mm
2. slide the receiver
clamp out of the
telephone, turn it 180°
and place it back onto
the telephone; this
clamp will hold the
receiver in case of
wall-mounting
3. hook the telephone with the screw holes over
the screws and press it downward
4. fix the telephone wire to the wall using the cable
clips
In case of wall-mounting, the table stand is NOT
used.
62