akkuteam SL50 Manuel D'utilisation page 50

Montage
The space requirement measurements in mm (inches) illustrated below are given to ensure
that there is easy access to the plug connecti ons:
280 mm
110,24 in.
NOTE! Protecti on class IP5K3 is only guaranteed in a
horizontal positi on
If the charger is installed in a switch cabinet (or a similar
sealed area), then forced-air venti lati on must be provid-
ed to ensure adequate heat dissipati on. There should be a
clearance of 10 cm (3.94 in.) all around the charger.
50
85 mm
33,46 in.
175 mm
68,90 in.
EN