LEXIBOOK Disney PIXAR The World Of Cars C7100PDE Guide De L'utilisateur page 11

AUDIO SETUP
In STOP mode, press the SETUP button on remote control. The SYSTEM SETUP MENU
appears, press /
C00PDE Zoram Eng.indd 0
SETUP MENU (CONTINUED)
buttons to select "AUDIO", then press button to confirm.
DIGITAL OUTPUT
Selecting the Digital Output setting allows the user
to adjust the audio output on S/PDIF ports to work
in harmony with the audio equipment connected to
the player, the following options are available.
•
(off) - To deactivate the digital audio output. For
(PCM) - Select this if the connected device is not
(RAW) - Select this if the connected device has a
DRC MODE
Select "ON" to turn the DRC (Dynamic Range
Compress) on, or "OFF" to turn DCR off.
Dynamic Range Compression will compress the
dynamic range of the DVD's audio track.
DOWN SAMPLING
When using the coaxial digital output, select "ON"
turn the Down Sampling on, or "OFF" to turn Down
Sampling off.
When Down Sampling is on, the digital output will be
sampling at 48k even if the original audio is encoding
in 96k for DVD.
GB - 0
In "Audio", press to select "DIGITAL OUTPUT",
then press button.
example, if you use the FRONT (L/R) AUDIO
OUT sockets to connect to a TV or stereo
system.
capable of decoding multichannel audio. The
DVD player will convert the Dolby Digital and
MPEG-2 multichannel signals to PCM (Pulse
Code Modulation).
built-in multichannel decoder that supports one
of the multichannel audio format (Dolby Digital,
MPEG-2).
2009/8/12 2:26:58 PM