Publicité
EN
About this manual
Table of contents
About this manual
Safety instructions
Scope of delivery
Dimensions
Installation
Flow conditions
Assembly
KHS quarter turn stop valve
Function check
Hot water
Cold water
Loop pipe + shutoff
Cleaning
Thermal disinfection
Chemical disinfection
With water (-air mixture)
Translation of original operating manual
manufacturer's address
4
Gebr. Kemper GmbH + Co. KG
5
Harkortstraße 5
12
57462 Olpe
12
Tel.: +49 2761 891-0
15
Web: www.kemper-olpe.de
17
After-sales service
18
Service hotline
22
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-olpe.de
24
25
About this manual
28
Read this manual carefully before starting installati-
on, commissioning, operation and maintenance, and
29
follow the instructions!
30
Always pass on this manual to the current plant
31
operating organisation. The plant operating organi-
sation must retain the manual for later reference.
The general illustrations in this manual are based
on Fig. 650 02, serve to aid basic understanding and
may differ from the actual system configuration.
This manual is protected by copyright. Copyright lies
with the manufacturer.
!
Target group
This manual is intended for plumbing specialists
who carry out the installation of the KHS Flow-Split-
ter It is also intended for the plant operating
organisation.
Personal qualifications
The KHS Flow-Splitter may only be installed by
plumbing specialists.
Liability
No warranty or liability is accepted for:
-
Failure to follow these instructions.
-
Incorrect installation and/or use.
-
Unauthorised modification of the product.
-
Other improper methods of operation.
4 / 32 – K410065000002-00 / 01.2021 – © www.kemper-olpe.de
Publicité
