Weidmüller TT 864 RS Mode D'emploi page 4

ENGLISH
Protect yourself from live parts
Do not work on live parts.
Cover and guard live parts near your workplace.
Application
Only use the tool for the applications described in the
operating instructions.
Do not use the tool and accessories for any work that
requires heavier-duty tools.
Do not use tools for purposes or work for which they are
not intended.
Using the tool for any other purpose may cause
accidents resulting in severe personal injury or irrepara-
ble damage to the tool or items of value.
Warning!
With some plugs and conductors available on the
market the results attained with this tool do not conform
to standards. This is due to the tolerances permitted in
the various standards and may occur even though the
conductor, plug and crimp articles used meet the
standards concerned.
For this reason the tool may only be used once its per-
formance has been tested in conjunction with the
articles and conductors being processed and any
necessary adjustments to the tool have been made.
Without testing the tool in this way, faulty contacts,
increased line resistance or inadequate tensile strength
may occur and adversely affect the safety of the overall
article.
This may cause severe personal injury or damage to
items of value.
If you are unable to conduct appropriate tests, please
contact your supplier and arrange for adjustment and
testing to be performed.
General information
For your own safety, only use the accessories and
attachments recommended in the operating instructions
or by the manufacturer.
Please observe the accident prevention regulations that
are applicable to you.
The tool must be inspected for proper operation on a
regular basis in line with the frequency of use and type
of service. If appropriate inspections are not possible at
the place of use, these may be conducted by the
manufacturer.
Repairs must only be performed by qualified personnel
in order to avoid operator accidents.