AIPTEK MobileCinema i50S Mode D'emploi page 10

User's Manual
Troubleshooting
Symptom
The projector can not turn on.
The projecting image is too
dark.
The projecting image is too
blurry.
The projector can turn on, but
the image can not be
projected.
The temperature of the
projector's surface is warm.
When connecting the iPhone
to the projector and see the
error message displayed in
iPhone screen as below.
Check Point
Ensure the battery is fully charged.
* Use the Projector in a darker
environment.
* Decrease the size of projecting
image.
Adjust the focus by using focus
wheel.
Ensure the App is equipped with
TV-out function.
It is normal for this projector to
generate moderate heat during
normal operation.
It may cause the bad connection
between iPhone and the projector.
Please reconnect iPhone and the
projector again.
5