REMA DSD05 Série Mode D'emploi page 19

ZERO
RATE
6
TARE
ZERO
MODE
TARE
ZERO
CODE
7
MODE
MODE
C0000
MODE
MODE
TARE
ZERO
Press ZERO to go back to the weighing session
The display will show RATE, which corresponds to the display update speed
selection
Press MODE to enter the function selection, then
Press ZERO to switch to/from MAS, 2-1 S, 1-1 S, 1-2 S and 1-4 S where:
MAS Update speed equalling the number of conversions.
X-Y S .Update speed equalling X times every Y seconds.
Press MODE to store the selected value and go back to the setting selection
menu.
Press TARE to move to the next parameter.(7)
Press ZERO to go back to the weighing state
The display unit will show CODE, which corresponds to the advanced
configuration section.
Press MODE to enter the advanced selection where a code must be entered for
each special setting.
Enter the code to be used.
Press MODE to enter the selection
Press MODE with the code on zero to leave the setting
Press TARE to go back to the first parameter. (1)
Press ZERO to go back to the weighing state.
19