Reset Function - Airwell K OG 30 LN 2T Manuel D'installation

CHILLED WATER CASSETTE
7

RESET FUNCTION:

1.
Remove one battery
2.
Simultaneously press these 4 keys until the symbols
are no longer displayed
3.
Reinstall the battery
The four keys to be pressed are:
NOTE :
Open the cover / flap to access the control keys.
e
lectricity
continueD
ON / OFF key
Operating mode selection key for
COOLING
HEATING
A U TO M AT I C C O O L I N G / H E AT I N G
REGULATION, FAN ONLY
I FEEL key: local detection of temperature
V E N T I L AT I O N S P E E D o r AU TO M AT I C
VENTILATION selection key
Set point increase key
Set point decrease key
SLEEP key (unoccupied mode)
"+" key: increases the operating time
"-" key: decreases the operating time
Liquid crystal diode display
I FEEL sensor
Infrared signal transmitter
ROOM key: display of the ambient temperature
LOCK key
SET key:Press for 5 seconds to set the time
remote control µBMS/RCW2
The Timer function is not available with Aquanet.
14
The other buttons , ,
remote control are not active in this version.
"Timer" function is available only in option with
and of the