Start-Up And Operation; Setting Up The Blower Unit; Switching On And Adjusting The Blower Unit - GEHEIT ABAC SG 90 E Instructions De Montage

6 Start-Up and
Operation
6.1 Setting up the Blower
Unit
Check that the mains voltage
l
corresponds to the operating
voltage specified on the ra-
ting plate or in these opera-
ting instructions.
Connect air hose to blower
l
unit. To do this tighten the air
hose connector piece in the
opening on the blower unit
by turning to the right (fig. 3).
6.2 Switching on and
Adjusting the
Blower Unit
Plug unit into mains and
l
switch on the pushbutton
switch using thumb (figs. 4
and 5).
26
Fig. 3
Push button
Fig. 4
Rotary knob