Notes On Safety; Principles; Correct Operation - GEHEIT ABAC SG 90 E Instructions De Montage

4

Notes on Safety

Besides this Operating Manual and the statutory safety regulations for
accident prevention applicable in the country and place of use, opera-
tors must also abide by the recognized codes of practice for safe and
workmanlike operation..

4.1 Principles; Correct Operation

The Spray Unit is state of the art equipment complying with recognized
l
safety regulations. However, if used improperly there is a risk of death
or injury to the user or other persons, or of damage to the machine or
other property.
Use the spray unit as specified and only if it is in perfect working order;
l
be safety-conscious and aware of the risks, and follow the operating in-
structions. In particular, take immediate action to rectify any faults which
may impair safety. Never pull the connecting cable over sharp-edged
objects and make sure the cable is in perfect condition each time before
using it.
The blower is intended solely for use with our own ABAC PN 2 or PN
l
5 low-pressure spray guns, which operate in the low-pressure range up
to 0.22 bar. You must also follow the instructions given in the relevant
operating manuals for these ABAC low-pressure spray guns PN 2
and PN 5.
It should not be used with low-pressure spray guns with disconnec-
table air supply (such as the ABAC PN 1).
It must not be used for any other purpose. The manufacturer or supplier
is not responsible and will not be liable for damage or injury resulting
from improper use, which shall be entirely at the user's risk.
The manufacturer cannot be held liable where the user carries out unau-
l
thorized modifications or repairs to the SG 90 E Blower Unit.
22