Hama ROCKMAN S Mode D'emploi page 6

4.4 Bluetooth pairing
®
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• If not, you can only use the speaker for playback
using the included audio cable.
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
range of max. 10 metres.
®
• Switch on the speakers as described in 4.1
Switching the product on and off.
• The status LED (1) starts to flash in blue. The speaker
searches for a connection.
• Open the Bluetooth
®
and wait until Hama Rockman-S / Rockman-L
appears in the list of Bluetooth
• Select Hama Rockman-S / Rockman-L and
wait until the speaker is listed as connected in
the Bluetooth
settings on your terminal device.
®
An acoustic signal confirms that connection was
successful.
• The status LED (1) now remains blue.
Note – Bluetooth
• Some terminal devices require a password in order
to connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
4
capable.
®
capable terminal
®
is activated.
®
settings on your terminal device
devices found.
®
password
®
device.
®
Note – Connection to a new device
• If you want to connect a new Bluetooth
device to the speaker, press the function buttons
– (3) and + (5) at the same time until the status
LED (1) begins to flash in blue and an acoustic
signal sounds.
• The current connection is disconnected and the
is
®
search for new terminal devices starts.
• The speaker always stores the last eight terminal
devices paired.
• The speaker will automatically connect to the last
terminal device paired when it is switched on the
next time.
4.5 Automatic Bluetooth
successful pairing)
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
• Switch on the speakers as described in 4.1
Switching the product on and off.
• After successful connection, the status LED (1) will
light up in blue. An acoustic signal confirms that
connection was successful.
Note – Connection impaired
• After the speaker and terminal device have been
paired, a connection is established automatically.
If the Bluetooth
automatically, check the following:
• Check the Bluetooth
terminal device to see whether Hama
Rockman-S / Rockman-L is connected. If not,
repeat the steps listed under Bluetooth
• Check whether your terminal device and the
speaker are less than 10 metres apart. If not, move
them closer together.
• Check whether obstacles are impairing the range.
If so, move the devices closer together.
• Check whether the audio cable is connected to the
speaker. If so, disconnect it.
connection (after
®
capable terminal
®
is activated.
®
range of max. 10 metres.
®
connection is not established
®
settings of your
®
terminal
®
pairing.
®