Raikko ACCEPT HEAVY METAL Mode D'emploi page 9

English
pAIRInG
Press the power switch (2) for about 7 seconds to go into
'pairing mode'. The device acknowledges access with two beep
tones. The LED display turns blue. Activate the Bluetooth
interface on your Smartphone, mobile or computer and connect
the HEAVY METAL BT to your device. If you are asked for your PIN,
®
enter '0000'. When the blue status LED blinks, a connection has
been established.
You cannot pair more than one device at the same time. Only one
playback device has access to HEAVY METAL BT
For additional information please consult the operational
instructions for your device.
sWItCHInG oFF/dIsConneCtInG
Press the power switch once briefly to turn off HEAVY METAL BT
opeRAtIon WItH An estABLIsHed BLUetootH
ConneCtIon
If a connection has been established, you have the option to
playback music or other audio streams via the HEAVY METAL BT
The volume is adjusted via the volume-control button of your
device. You have the additional option of setting the volume on the
HEAVY METAL BT yourself. Press the V + (5) and V − (3) buttons
®
until you reach the desired volume. You will hear a beep once you
have reached the maximum volume.
16
HEAVY METAL Bluetooth
®
®
at any given time.
®
.
®
®
.
®
English
The maximum range of the wireless connection is 10 metres. Massive
obstacles such as furniture and walls or electrical appliances can
limit the range.
When you switch the speaker on the volume is set to a medium level.
It is possible to operate the playback functions of the HEAVY METAL
BT by remote control if the linked device supports this function.
®
To play or stop, press the Play/Pause button (4) once briefly. To
skip to the next track, press the V + button (5) once briefly. To play
the current track again, press the V − button (3) once briefly, or
repeatedly to switch to previous tracks.
on A MoBILe pHone
When using a Bluetooth -enabled mobile phone, you can answer
®
calls by briefly pressing the Play/Pause button (4) (indicated by a
telephone symbol). End the call by pressing the button once.
Calls can be rejected by pressing and holding the telephone button.
AUdIo oUtpUt VIA CABLe ConneCtIon
To play back an audio signal via cable insert the line IN cable into
the appropriate socket (1). Connect the other end to the headphone
output on your Smartphone, mobile, MP3/4 players or to the audio
output on a computer/laptop.
Playback via Bluetooth connection stops automatically when a cable
®
is inserted. Playback via Bluetooth
when the cable is removed.
HEAVY METAL Bluetooth
is restarted (if a device is paired)
®
®
17