Technical Data Padua - HASA PADUA 160 Manuel D'utilisation

11. Technical Data Padua 160/185

The Padua 160/185, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG
(Austria), can only be operated when the fire box is closed. x
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output**
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 7,9 kW
indicated on 30 - 115 m² (subject to change).
Dimensions:
Stove
Fire box
Weight Padua
Weight wood box
Wood
Weight 1x heat retaining block, flue pipe connection top/rear
7,9 kW Weight 1x heat retaining block, flue pipe connection laterally
Flue pipe diameter
8,7 kW
Pipe diameter of HASE ventilation system**
247 ˚C
297 ˚C
7,8 g/s
12 Pa
81,0 %
≤ 1250 mg/Nm³
≤ 40 mg/Nm³
≤ 120 mg/Nm³
≤ 200 mg/Nm³
34 m³/h
* Test bench performance and values at 13% O2
** For separate air supply
Height Width
159/185 cm 81 cm
39 cm 56 cm
300/340 kg
56/56//112/112 kg
Depth
39 cm
22 cm
90/105 kg
28/91 kg
15 cm
10 cm
GB
55