Lcd Display - Autopilot APC8200 Manuel D'utilisation

1. CO Trend Chart
2
2. AVG HI reading of Chart
3. AVG LO reading of Chart
4. Audible Alarm On/Off
5. CO Zone value
2
(deadband setting)
6. CO Center value
2
₂
(Ideal CO level)
7. CO Reading
2
8. Zoom Level of Time –
indicates the chart's
timespan
9. Target Zone Indicator
Once the countdown is complete, your product is ready to use. No additional setup or calibration is
needed.
CO , SET CENTER, SET ZONE READINGS
2
The device has three built-in main parameters: ambient carbon dioxide (7), Set Center value (6), and
Set Zone value (5). They are constantly displayed on screen.
TREND CHART ZOOM
Below is a table showing the available Zoom Levels for all CO
each interval for corresponding Zoom Levels:
The DOWN button will toggle the available Zoom Levels for each parameter. Note that in addition to
the Zoom Levels for each parameter, there is an option that will automatically cycle between the Zoom
Levels. This can be achieved by pressing DOWN until icon (8) appears at the bottom left of the chart.
Zoom Level (Time Span) (8)
1m (minute)
1h (hour)
1d (day)
1w (week)
Auto Cycle Zoom

LCD DISPLAY

Time Per Interval
5sec /div
5m/div
2h/div
0.5d/div
Cycle
3
parameters, as well as the duration of
2