König Electronic IR-URC30 Mode D'emploi page 7

3. Press the ▲ or ▼ key to select the TIME SETUP in the LCD menu, and then
press the OK key.
4. Press the ◄ or ► key to move the cursor to select hour or minute or
AM/PM, then press the number key to set hour and minute, and press the
▲ or ▼ key to select AM or PM.
5. Press the OK key to save the setting and LCD display SUCCESS for
1 second then exit to current setup state, if you enter errors the LCD screen
shows ERROR for 1 second. You can press any device key to finish the set
up or press EXIT key return to the last state.
Background Light
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the ▲ or ▼ key to select the CONFIGURE in the LCD menu, and then
press the OK key.
3. Press the ▲ or ▼ key to select the LIGHT in the LCD menu, then press the
OK key.
4. Press the ◄ or ► key to change to the ON or OFF mode.
5. Press the OK key to save setting and LCD shows SUCCESS then exit to
current set up state, you can press any device key to finish set up or press
the EXIT key to last state, or you can use ▲ or ▼ to select other set up.
Contrast Adjust
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the ▲ or ▼ key to select the CONFIGURE in the LCD menu, then
press the OK key.
3. Press the ▲ or ▼ key to select the CONTRAST in the LCD menu, then
press the OK key.
4. Press the ◄ or ► key to adjust contrast level, and then press the OK key
when you are satisfied.
5. Press the OK key to save the setting and the LCD shows SUCCESS then
exit to current setup state, you can press any device key to finish set up or
press the EXIT key to last state, or you can use ▲ or ▼ to select another set up.
Show View Function
1. Press the device key to select the device (such as TV) that you want to operate.
2. Press and hold the Show View key about 1 second. When the device's LED
flashes and it goes into Show View mode. The remote control automatically
scans all channels for a brief quick view.
Remark:
1. The remote control must be pointed at the device until the Show View mode
is finished.
2. If you want to exit the show view mode, please press any key.
SET 3S
7
1S