König Electronic IR-URC30 Mode D'emploi page 6

Select a key you want to delete
Delete All Learnt Command For a Device
1. Press a device key (e.g. TV) where you want to delete commands from.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll ▲ or ▼ key to LEARNING in the LCD menu, and then press the OK
key and the LCD display LEARN KEY.
4. Scroll ▲ or ▼ key to DELETE DEV in the LCD menu and then press the OK
key.
5. You select the device want to delete, then press the OK key.
6. The LCD shows SURE DELET and then press the OK key, the LCD shows
SUCCESS.
7. Repeat step 5 to delete commands in other device key.
8. Press EXIT key (e.g. TV) to quit deletes operation.
Select a device
you want to delete
(e.g. TV)
Remark: sometimes it can take about 3 minutes to delete all commands in one
device. If there aren't many commands, delete commands one by one.
Other Set Up
A. Set up Clock
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the ▲ or ▼ key to select the CONFIGURE in the LCD menu, and then
press the OK key.
SET 3S
SET 3S
6
1S
1S