patura 148621 Mode D'emploi page 7

Mounting to carry boxes
Align the bottom-frames of the mounting
bracket within a distance of 15 cm centered
on the top front of the box, mark the drill
holes and drill 2 x 6.5 mm holes.
Mounting to vandal-proof boxes
Align the bottom-frames of the mounting
bracket within a distance of 27 cm centered
on the top front of the box, mark the drill
holes and drill 2 x 6.5 mm holes.
Mount the pre-assembled solar panel to
the vandal-proof box.
Mounting and connection to vandal-proof boxes and carry boxes
Guide the solar panel connecting cable
through the large cable support sleeve on
the side of the vandal-proof box.
Screw the mounting brackets to the
vandal-proof box (screw M6x35, spacer
sleeve, support plate, self-locking nut M6).
Screw the mounting brackets to the
(screw M6x35, spacer
vandal-proof box
sleeve, support plate, self-locking nut M6).
Guide the connecting cable through the ope-
ning of the open carry box to the battery.
- 7 -
Mount the pre-assembled solar panel to the
vandal-proof box.
View of the interior
Insert the cable socket of the red cable in
the free plug position of the red battery
clip. The black cable should be connected to
the black battery clip as described above.