Jotul C 24 Manuel D'installation page 11

Fig. 12
A
A
B
4. Remove the frame from its cardboard box and place it. Do not
fasten it yet. A wide frame is available as an optional
Fig. 13
5. If necessary, the 2 nuts (Fig.13A) can be loosened slightly and
the primary air vent (Fig.13B) can be pulled forward. This
makes it easier to reach. Next, tighten the nuts.
6. If everything looks right, put the 4 screws (Fig. 10 A) that were
removed back into place.
7. Secure the frame into place using the screws
(Fig. 12 A and B) from the bag in the frame's
B
extra.
A
B
box.
Fitting the flue pipe
Fig. 14
A B
1. Open Open the 2 lugs (Fig. 14A) next to the smoke outlet and
remove the 2 screws (Fig. 14B) .
Fig. 15
A
2. Make 2 Ø 8 mm holes for the fixing screws in the flue pipe.
Place the gasket (A) on the flue pipe.
3. Place the flue pipe on the connector and secure with screws
(Fig. 14). Next, close the lugs (Fig. 14A).
4. Refit all loose parts that were removed from the product.
See Chapter 4.7
english
B A
11