Audiophony PA WALLAMPtouch Guide De L'utilisateur page 19

WALLAMtouch - 2 x10W wall amplifier - SD/BT/Radio/AUX/USB with touch screen and line output
5.2 - USB/SD
Use the USB or SD button to select SD or USB mode.
If an SD card or USB media is inserted and contains playable songs, playback starts
automatically and the display shows the progress of the time.
Playback control :
- Use and buttons to move from one song to another.
- Use button to pause or restart playback.
Volume control : Use the
5.3 - BLUETOOTH
Double-click the Bluetooth button to select BLUETOOTH mode.
To establish the connection, look for the device named WALLAMPTOUCH on your
Bluetooth device. Then enter the code: 1234 to finalize the connection.
Playback control : Use your device to manage playback features.
Volume control : Use the
5.4 - AUX
Use the AUX button to select the AUX IN mode.
Playback control : Use the
When the source is turned off, the display flashes.
Volume control : Use the
Sensitivity adjustment : Press and hold
setting. Two sensitivity levels are available: S1 (500mV) or S2 (1000mV).
cursor to adjust the volume.
cursor to adjust the volume.
button to turn the auxiliary source off or on again.
cursor to adjust the volume.
and buttons to access the sensitivity
English