Publicité
Les langues disponibles
Les langues disponibles
Français
WALLAMPtouch - 2 x10W wall amplifier - SD/BT/Radio/AUX/USB with touch screen and line output
Instructions and recommendations
1 - Please read carefully :
We strongly recommend to read carefully and understand
the safety instructions before attempting to operate this unit.
2 - Please keep this manual :
We strongly recommend to keep this manual with the unit
for future reference.
3 - Operate carefully this product :
We strongly recommend to take into consideration every
safety instruction.
4 - Follow the instructions:
Please carefully follow each safety instruction to avoid any
physical harm or property damage.
5 - Avoid water and wet locations :
Do not use this product in rain, or near washbasins or other
wet locations.
6 - Installation :
We strongly encourage you to only use a
fixation system or support recommended
by the manufacturer or supplied with this
product. Carefully follow the installation
instructions and use the adequate tools.
Always ensure this unit is firmly fixed to
avoid vibration and slipping while operating as it may result
in physical injury.
7 - Ceiling or wall installation :
Please contact your local dealer before attempting any ceiling
or wall installation.
8 - Ventilation :
The cooling vents ensure a safe use of this
product, and avoid any overheating risk.
Do not obstruct or cover these vents as it may
result in overheating and potential physical
injury or product damage. This product should
never been operated in a closed non-ventilated area such
as a flight case or a rack, unless cooling vents are provided
for the purpose .
9 - Heat exposure :
Sustained contact or proximity with warm surfaces may cause
overheating and product damages. Please keep this product
away from any heat source such as a heaters, amplifiers,
hot plates, etc...
10 - Electric power supply :
This product can only be operated according to a very specific
voltage. These information are specified on the label located
at the rear of the product.
11 - Power cords protection:
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords at lugs, convenience
receptacles and the point where they exit from the fixture.
12 - Cleaning precautions :
Unplug the product before attempting any
cleaning operation. This product should be
cleaned only with accessories recommended by
the manufacturer. Use a damp cloth to clean the
surface. Do not
13 - Long periods of non use :
Disconnect the unit's main power during long periods
of non use.
14 - Liquids or objects penetration :
Do not let any object penetrate this product as it may result
in electric shock or fire.
Never spill any liquid on this product as it may infiltrate the
electronic components and result in electric shock or fire.
15 - This product should be serviced when :
Please contact the qualified service personnel if :
- The power cord or the plug has been damaged.
- Objects have fallen or liquid has been spilled
into the appliance.
- The appliance has been exposed to rain or water.
- The product does not appear to operate
normally.
- The product has been damaged.
16 - Inspection/maintenance :
Please do not attempt any inspection or
maintenance by yourself. Refer all servicing to
qualified personnel.
17 - Operating environment :
Ambient temperature and humidity: +5 - +35°C,
relative humidity must be less than 85% (when
cooling vents are not obstructed).
Do not operate this product in a non-ventilated,
very humid or warm place.
wash this product.
Publicité
