Publicité
Les langues disponibles
Les langues disponibles
Use only the accessories recommended by the manufacturer.
Keep the product packaging out of the reach of infants and children
to avoid any danger.
Application
1.
Connect the power cord to a power source. To turn on the
EXCELLENCE infrared and ion hair straightener, press and hold
the On/Off button on the side of the product for 2 seconds until
the display lights up.
2.
Press the +/- button to set the desired temperature. By pressing
„+" and „-" at the same time you can switch between Celsius and
Fahrenheit. The different temperature levels (120°C to 230°C)
can have different smoothing effects. Start with a lower level first
and increase the temperature if necessary.
3.
Comb your hair and separate a strand of hair up to 5 cm wide.
4.
Place your hair between the two ceramic tourmaline surfaces
and press the handles. together. The top of the appliance gets
very hot during use. Therefore, avoid direct physical contact.
5.
For a straightening effect, move the appliance in a single move-
ment (within 5 seconds maximum) without interruption from the
hairline to the tips.
6.
To style curls or waves, fix the hair tips between the ceramic
tourmaline plates. Turn the straightener slowly inwards or out-
wards.
7.
To style the rest of your hair, repeat the steps.
8.
Press and hold the on/off button on the side of the product for
2 seconds again until the appliance turns off and unplug the
appliance from the power outlet.
9.
Place the appliance on a heat-resistant surface to allow it to cool
down.
10. Clean the unit and especially the ceramic tourmaline plates only
with a damp cloth.
- 9 -
Publicité
