Beurer medical BC 44 Mode D'emploi page 20

Permissible oper­ + 10 °C to + 40 °C, ≤ 90 % relative air
ating conditions humidity (non­condensing)
Permissible stor­ ­ 20 °C to + 55 °C, ≤ 90 % relative air hu­
age conditions midity, 800 –1050 hPa ambient pressure
Power supply 2 x 1,5 V
Battery life For approx. 180 measurements, depend­
ing on the blood pressure level and/or
pump pressure
Accessories Instruction for use, 2 x 1.5 V AAA batter­
ies, storage box
Classification Internal supply, continuous operation,
type BF applied part, IPX0, no AP or
APG
Technical information is subject to change without notifica­
tion to allow for updates.
• This unit is in line with European Standard EN 60601­1­2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may in­
terfere with this unit. More details can be requested from
the stated Customer Service address or found at the end
of the instructions for use.
• This device is in line with the EU Medical Devices Direc­
tive 93/42/EEC, the "Medizinproduktegesetz" (German
AAA batteries
20
Medical Devices Act) and the standards EN 1060­1
(non­invasive sphygmomanometers, Part 1: General
requirements), EN 1060­3 (non­invasive sphygmoma­
nometers, Part 3: Supplementary requirements for
electro­mechanical blood pressure measuring systems)
and IEC 80601­2­30 (Medical electrical equipment –
Part 2 – 30: Particular requirements for the safety and
essential performance of automated non­invasive blood
pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur­
poses, it must be regularly tested for accuracy by appro­
priate means. Precise instructions for checking accuracy
may be requested from the service address.