König Electronic KN-MICW410 Manuel D'utilisation page 5

MOUNTING:
The KN-MICW410 and 420 can be mounted in following ways:
KN-MICW410 can be mounted to the wall with supplied bracket.
See below figure.
KN -MICW420 can be combined for 19" mounting. Use supplied accessory.
See below figure.
7
.
SPECIFICATIONS:
Frequency range: 864MHz
RF output power: 10mW
Oscillator: PLL
Modulation: FM
AF response: 50 - 15.000Hz (± 3dB)
Frequency stability: ± 0.005%
S/N ratio: >94dB at 48kHz deviation
Dynamic range: >96dB
Total harmonic distortion: <1% at 1kHz
DECLARATION OF CONFIRMITY
We,
Declare under our responsibility that the product;
Brandname: KN
Model: KN-MICW410, KN-MICW420, KN-MICW430
Description: Wireless microphone system
Is in conformity with the following standards;
Radio: EN 300 422-2
EMC: EN 301 489-1/-9
LVD: EN 60065
Following the provisions of the 1999/5/EC R&TTE Directive.
Conform this regulation it's allowed to use this product in
the European Community & EFTA countries.
We are not responsible for the use of this product outside
the European Community & EFTA countries.
's-Hertogenbosch, 14-06-2006
Mrs. J. Gilad
Purchase Director
8
.