Kohler Jacob Delafon DTV Prompt Manuel D'installation Et Guide De L'utilisateur page 11

Test for Proper Operation (Requires an Installed Interface) :
•
Press the Power Icon on the user interface. The interface should turn on and the screen
will be lit.
•
Refer to the user interface user guide to set up the interface.
•
The maximum water temperature to the outlets is limited to 49°C (120°F). The valve will
automatically shut down if the temperature exceeds it.
Mixing valves which have been in storage, installed recently or not been used for some time,
should be exercised before running ant tests or setting the maximum temperature. Follow the
steps below to exercise your valve.
•
Make sure that both hot and cold water supplies are connected to the appropriate valve inlets.
•
Using the UP and DOWN arrow icons on the user interface, adjust the temperature from cold
to hot and back to cold several times, pausing for 30 seconds at each extreme.
11
EN