Using A Two Way Radio Transceiver - Midland BT Single Guide D'utilisation

audio confirmation tones).
› enabling: briefly press the "AUX" button (you will hear one
audio confirmation tone).

Using a Two Way Radio transceiver

To be able to use the transceiver, it is necessary to purchase
a specific cable (sold separately) in order to connect the radio
to your Midland BT Single:
› NB, Some manufacturers radios use a different pin
configuration, so we recommend that you ask your de-
aler as to which cable is best suited to your needs
To communicate via the attached radio, press the transmis-
sion Press Top Talk (PTT) button to speak and release it to
listen. it is not possible to talk and listen simultaneously. The
cable connected to the transceiver has a PTT button that can
be placed on the handlebar of your bike.
Adjust the volume of the transceiver to your needs, remembe-
ring that the volume adjustment is controlled by the automatic
AgC system and that it will therefore be automatically increa-
sed in relation to background noise.
10