Troubleshooting - Archos 101 Cobalt Mode D'emploi

Masquer les pouces Voir aussi pour 101 Cobalt:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15

Troubleshooting

If your device is frozen:
Press the ON/OFF button for 10 seconds or use the reset button. To use the reset button, press the
"pinhole reset" button by using a sharp object such as a toothpick.
If your device doesn't turn on:
1. Charge your device.
2. Press the ON/OFF button for 10 seconds or use the reset button. To use the reset button, press
the "pinhole reset" button by using a sharp object such as a toothpick.
If you want to extend the life of your battery:
Decrease the screen brightness and turn off the wireless connections if not in use.
If your device functioning is too slow:
Close all apps which are not currently used.
If your WiFi reception is too low:
Make sure you are not far from the WiFi hotspot.
Update the firmware of the device: http://www.archos.com/support.
Reset and redefine your connection parameters.
Contact your WiFi connection provider.
If you want to restore your product (forgotten password? erase all your settings?) :
1. While holding Volume+, connect the supplied power cable to the ARCHOS and to a wall outlet.
2. Once the green robot ANDROID is displayed, release the volume+ button.
3. Press and hold the ON/OFF button and press once the volume+ button.
The Android system recovery is displayed.
4. Use the Volume buttons to scroll and the ON/OFF button to validate.
- Select "Wipe data/factory reset" and validate.
- Select "Yes -- delete all user data" and validate.
- Select "Reboot system now" and validate.
14

Publicité

Table des Matières
loading

Table des Matières