Troubleshooting - Archos 101b Copper Mode D'emploi

Troubleshooting

If your device is frozen:
Press the ON/OFF button for 10 seconds or use the reset button. To use the reset button,
press the "pinhole reset" button by using a sharp object such as a toothpick.
If your device doesn't turn on:
1. Charge your device.
2. Press the ON/OFF button for 10 seconds or use the reset button. To use the reset
button, press the "pinhole reset" button by using a sharp object such as a toothpick.
My tablet cannot connect to a network or "No service" is displayed
Try connecting in another location. Verify the network coverage with your operator.
Unable to make outgoing calls
Make sure your phone is connected to a network, and the network is not overloaded
or unavailable.
Unable to receive incoming calls
Make sure your phone is switched on and connected to a network (check for
overloaded or unavailable network).
SIM card PIN locked
Contact your network operator to obtain the PUK code (Personal Unblocking Key).
If your WiFi reception is too low:
Make sure you are not far from the WiFi hotspot.
Update the firmware of the device: http://www.archos.com/support.
Reset and redefine your connection parameters.
Contact your WiFi connection provider.
14
ARCHOS_101b_Copper_QSG_book.indd 14 23/01/2015 15:57:07